China Customized Anti-Explosion Fire Monitor Manufacturers Suppliers - Factory Direct Price

Fire Sprinkler System
- Standard Response Fire Sprinkler
  - Standard Response Fire Sprinklers
- Quick Response Fire Sprinkler
Fire Protection Valve
- Flanged Gate Valve
- Grooved Gate Valve
Fire Monitor
- Fixed Manual Fire Monitor
- Anti-Explosion Fire Monitor

NONFIR Industrial

Remote Control Fire Monitor

Motorised fire monitors for hazardous-area installations requiring remote suppression without operator exposure. Triple-mode control - wireless transmitter, wired panel, and mechanical handwheel backup - with full explosion-proof certification for Zone 1 and Zone 2 classified areas.

Specification	Details
Monitor Body	SS 304 / 316
Power Supply	AC 220V
Motor Actuator	24V DC
Horizontal Travel	340°
Vertical Travel	−45° to +85°
Control Modes	Wireless / Wired / Manual
Flange Standard	BS4504 · ANSI 150 · GB
Inlet Size	2.5 / 3 / 4 inch
Agent	Water · Water + Foam

Product Series

The XFS range covers water-only and dual-agent foam monitors, with straight stream, fog, and stacked tips nozzle configurations. All models carry explosion-proof certification and share the same triple-mode control architecture.

SS Nozzle · Stream / Fog

XFS1 Series · Water Monitor

NONFIR Industrial Remote Control Fire Monitor

Full stainless steel body and nozzle with brass trim. Remotely controlled straight stream and 120° fog patterns. Ideal for petrochemical plant perimeter protection where maximum corrosion resistance is required alongside remote operation.

Flow Range	1200 – 2400 LPM
Max Reach	65 m
Fog Angle	120°
Inlet	2.5 / 3 / 4″

Stacked Tips · Straight Stream

TFS1 / TFS2 · Tiller · Stream/Fog

NONFIR Industrial Remote Control Fire Monitor

Electrically actuated stacked-tip nozzle system enabling remotely selectable flow rates without field intervention. XFS2 variant reaches 4800 LPM and 85 m - for large refinery and terminal installations requiring both high flow and remote operation.

Flow Range	1200 – 4800 LPM
Max Reach	85 m
Pattern	Stacked Tips
Inlet	2.5 / 3 / 4″

Straight Stream · AZ-1

Straight Stream · AZ-1 NONFIR Industrial Remote Control Fire Monitor

Dedicated straight stream configuration for maximum range and penetrating power into deep-seated fires. Remote directional control via wireless or wired panel. Available from 1200 LPM up to 4800 LPM with full explosion-proof motor actuation.

Flow Range	1200 – 4800 LPM
Max Reach	85 m
Pattern	Straight Stream
Inlet	2.5 / 3 / 4″

Water Foam Monitor · SP Nozzle

XFS1 / XFS2 · Foam Monitor NONFIR Industrial Remote Control Fire Monitor

Electrically controlled dual-agent monitor. SP nozzle delivers both water and AFFF/FFFP foam remotely, with foam throw up to 70 m. Designed for tank farm and loading rack protection where Class B suppression must be initiated from a safe control location.

Flow Range	1440 – 3840 LPM
Water Reach	50 – 75 m
Foam Reach	42 – 70 m
Inlet	2.5 / 3 / 4″

Water Foam Monitor · SQ Nozzle

XFS1 / XFS2 · Foam Monitor

NONFIR Industrial Remote Control Fire Monitor

SQ nozzle variant of the electrical foam monitor. Identical performance envelope to the SP series with an alternative nozzle geometry for specific foam concentrate compatibility or system integration requirements on site.

Flow Range	1440 – 3840 LPM
Water Reach	50 – 75 m
Foam Reach	42 – 70 m
Inlet	2.5 / 3 / 4″

Explosion-Proof Control Box Remote Control Unit

Explosion-proof remote control unit for electrically operated fire monitors. Designed for hazardous-area installations where reliable remote monitor operation is required. Compatible with electric water and foam monitors, providing safe monitor positioning and control while meeting the operational requirements of petrochemical facilities, tank farms, and other classified industrial environments.

Flexible Control Solutions

Wireless Transmitter

Handheld wireless controller provides real-time remote positioning of horizontal and vertical axes from a safe standoff distance. Enables immediate directional response during active incidents without requiring personnel to enter the hazard zone. Primary mode for incident response operations.

Wired Control Box

Fixed-panel wired controller for permanent control-room or fire station integration. Provides continuous and reliable command from a designated safe area. Supports interfacing with site DCS, SCADA, or fire and gas detection systems for semi-automated or automated suppression response sequences.

Manual Handwheel

Aluminum alloy handwheel provides fully mechanical operation requiring no electrical power whatsoever. Functions as last-resort backup during complete power failure and as primary control mode during commissioning, maintenance, and testing when electrical systems are isolated for safe work. Cannot be disabled by electrical fault.

Typical Applications

Petrochemical & Refinery Plants

High-capacity TFS2 and WFS2 monitors protect process units, pipe racks, and storage areas in oil refineries and petrochemical complexes. The 4800 LPM maximum flow and 85 m reach meet the protection distances mandated by NFPA 15 for large industrial installations.

Marine & Offshore Facilities

The SS 316 body option provides superior resistance to seawater chloride corrosion, making TFS and WFS monitors suitable for jetty heads, offshore platforms, LNG terminals, and ship-loading facilities where marine-grade materials are specified.

Power Generation & Utilities

Coal yards, transformer bays, turbine halls, and cooling tower areas benefit from tiller-control monitors for rapid manual response. The stacked tips series allows operators to select the appropriate flow rate for the hazard without equipment changeover.

Foam Report for Simple and Precise Documentation - Rosenbauer

Airport & Aviation Infrastructure

Fuel hydrant systems, aircraft maintenance hangars, and apron areas require both water and foam suppression capability. The TFS and WFS foam monitor series provides the dual-agent flexibility required by ICAO and CAA fire protection standards for aviation facilities.

Technical Specifications

Series	Nozzle Material	Spray Pattern	Flow Range	Water Reach	Foam Reach	Inlet Size	Agent	Rated
XFS1.FS / SS	SS 304/316 + Brass	Stream + 120° Fog	1200 – 2400 LPM	50 – 65 m	-	2.5 / 3 / 4″	Water	Ex-Proof
XFS1–2.AZ-4	Aluminum Alloy	Stacked Tips	1200 – 4800 LPM	50 – 85 m	-	2.5 / 3 / 4″	Water	Ex-Proof
XFS1–2.AZ-1	Aluminum Alloy	Straight Stream	1200 – 4800 LPM	50 – 85 m	-	2.5 / 3 / 4″	Water	Ex-Proof
XFS1–2.SP	SS + Aluminum (SP)	Straight Stream	1440 – 3840 LPM	50 – 75 m	42 – 70 m	2.5 / 3 / 4″	Water + Foam	Ex-Proof
XFS1–2.SQ	SS + Aluminum (SQ)	Straight Stream	1440 – 3840 LPM	50 – 75 m	42 – 70 m	2.5 / 3 / 4″	Water + Foam	Ex-Proof

All specifications at 8 bar. Contact us for full model-by-model data sheet.

Selection Guide

1

Is the Area Classified Hazardous?

If the installation area carries a Zone 1 or Zone 2 hazardous classification under IEC 60079 or equivalent national standard, the XFS explosion-proof series is the required choice. Standard motorised monitors with non-rated electrical components are not suitable for these areas. The XFS series should also be considered for Zone 2 areas where the consequence of ignition is high, even where standard equipment may be technically permissible.

2

Water-Only or Water + Foam?

Specify XFS.SP or XFS.SQ foam monitor variants where the protected hazard includes flammable liquids (Class B risk). These deliver water and AFFF/FFFP foam from a single monitor and inlet - remote foam application is initiated from the control interface without personnel entry. For Class A and general cooling duties, the XFS water-only variants (FS, AZ-1, AZ-4 series) are appropriate.

3

Nozzle Type: SS, Stacked Tips, or Straight?

The XFS1.FS series (SS+Brass nozzle) is specified for maximum corrosion resistance in marine and chemical environments. The AZ-4 stacked tips series is specified where variable flow rates are operationally desirable and must be selectable remotely without nozzle change. The AZ-1 straight stream series is specified for maximum reach and concentrated stream penetration into deep-seated fires in enclosed or congested areas.

4

Control Interface Requirements

All XFS models include wireless transmitter, wired control box, and manual handwheel as standard. For projects requiring DCS or SCADA integration, confirm interface protocol requirements at quotation stage - the wired control box can be specified with appropriate signal outputs for integration with site control systems. For unmanned facilities, auto-trigger functionality via detection system interface should be discussed with the engineering team at design stage.

Explosion-Proof Remote Foam Monitor
1. Explosion-proof design for hazardous-area applications.2. Remote electric control for precise positioning.3. 340° horizontal and -45° to +85° vertical movement.4. Straight stream and fog spray discharge modes.5. Water and foam discharge
read more
Explosion-Proof Electric Fire Monitor
1. Triple control with wireless, wired, and manual operation.2. 24V motorized positioning for smooth and precise movement.3. 340° horizontal and -45° to +85° vertical rotation.4. Remote selection of straight stream and fog spray.5.
read more
Electrical Remote Control Water Foam Monitor XFS Series
The Electrical Remote Control Water Foam Monitor is an explosion-proof industrial fire protection device designed for hazardous environments. It delivers high-flow water and foam with long-range coverage up to 75 meters. Featuring remote
read more
Electrical Remote Control Fire Monitor – Explosion Proof ...
The Explosion-Proof Electrical Remote Control Fire Monitor is designed for hazardous industrial environments such as petrochemical plants, oil depots, and refineries. It features remote operation, explosion-proof construction, and
read more
Electrical Remote Control Water Foam Monitor – Explosion ...
Explosion-proof electrical remote control water foam monitor designed for hazardous industrial environments. Supports water and foam dual-agent firefighting with wireless, wired, and manual control modes. Built in SS304/316 for corrosion
read more
Electrical Remote Control Fire Monitor – Explosion Proof
The Explosion-Proof Electrical Remote Control Fire Monitor is designed for high-risk industrial fire protection applications. It enables safe, precise, and efficient firefighting operations from a remote control system, suitable for
read more
Explosion-Proof Electric Remote Control Fire Monitor
The Electrical Remote Control Fire Monitor is an advanced industrial firefighting solution featuring explosion-proof electric actuation and multi-mode remote control. It enables safe, precise operation from a distance, delivering water or
read more

WHY CHOOSE NONFIR

Industrial-Grade Quality

NONFIR fire monitors are manufactured with stainless steel or aluminum alloy, ensuring high durability, corrosion resistance, and long service life for industrial applications.

Reliable Performance

Designed for high-flow discharge, our monitors provide stable water or foam projection with long reach and consistent pressure control in emergency situations.

Flexible Control Options

Supports electric remote control, wired control box, wireless operation, and manual override, ensuring safe and convenient operation in different scenarios.

Explosion-Proof Solutions

Optional explosion-proof models are available for hazardous environments such as oil refineries, chemical plants, and fuel storage areas.

Strict Quality Control

Each unit undergoes pressure testing and performance inspection before delivery to ensure reliability and compliance with fire protection requirements.

Global Industrial Applications

Widely used in petrochemical plants, warehouses, ports, airports, and large industrial facilities requiring high-capacity fire protection systems.

As one of the leading anti-explosion fire monitor manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to buy customized anti-explosion fire monitor made in China here from our factory. For price consultation, contact us.